With my very small collection of locomotives and rolling stock starting to grow, I needed someplace to store them while not in use. Even though my collection is currently very small, it is ever so slowly growing, I needed more of a long-term storage solution. I searched my shed and basement and managed to round up just enough scrap material to construct a wood display case which will mount to the wall adjacent to my layout.
The case frame measures 37 1/2” inches wide by 35” tall and is constructed from 3” x 3/4” lumber, screwed and glued together at the corners. The six shelves are made of 2” x 5/8” lumber and are 36” long, allowing for a full length of flex track to be mounted. The shelves were then mounted to the frame with screws and wood glue. The backing is made from 1/8” thick hardboard.
As I mentioned before, this was made almost completely from scrap materials and was done easily on a Saturday afternoon. It is nothing fancy or complicated, but at least I have a place to store, display, and protect my locomotives and rolling stock. Next week I will hopefully add horizontal sliding glass or clear acrylic doors to keep the dust out.
0 Yorumlar